User manual

SM User Manual January 2004

Software Release 4.1

4.7.13 MIB Viewers

Any of several commercially available MIB viewers can facilitate management of these objects

through SNMP. Some are available as open source software. The Canopy division does not

endorse, support, or discourage the use of any these viewers.

To assist end users in this area, the Canopy division offers a starter guide for one of these

viewers—MRTG (Multi Router Traffic Grapher). This starter guide is titled Canopy Network

Management with MRTG: Application Note, and is available in the Library section under Support at

http://www.motorola.com/canopy. MRTG software is available at http://mrtg.hdl.com/mrtg.html.

Other MIB viewers are available and/or described at the following web sites:

http://ns3.ndgsoftware.com/Products/NetBoy30/mibbrowser.html

http://www.adventnet.com/products/snmputilities/

http://www.dart.com/samples/mib.asp

http://www.edge-technologies.com/webFiles/products/nvision/index.cfm

http://www.ipswitch.com/products/whatsup/monitoring.html

http://www.koshna.com/products/KMB/index.asp

http://www.mg-soft.si/mgMibBrowserPE.html

http://www.mibexplorer.com

http://www.netmechanica.com/mibbrowser.html

http://www.networkview.com

http://www.newfreeware.com/search.php3?q=MIB+browser

http://www.nudesignteam.com/walker.html

http://www.oidview.com/oidview.html

http://www.solarwinds.net/Tools

http://www.stargus.com/solutions/xray.html

http://www.totilities.com/Products/MibSurfer/MibSurfer.htm

4.8 NAT, DHCP SERVER, DHCP CLIENT, AND DMZ IN SM

In Release 4.1 and later releases, the Canopy system provides NAT (network address translation

for SMs in the following combinations of NAT and DHCP (Dynamic Host Confiuration Protocol):

• NAT Disabled (as in earlier releases)

• NAT with DHCP Client and DHCP Server

• NAT with DHCP Client

• NAT with DHCP Server

• NAT without DHCP

Issue 5 Page 41 of 119