User manual

SM User Manual January 2004
Software Release 4.1
Specification Canopy System Range
Ethernet, GPS sync, and
GPS coax cables
The use of cables that are rated for the operation temperature of
the product and that conform to UV light protection specifications
is mandatory. The use of shielded cables is strongly
recommended. For information about the supplier of these
cables, see CANOPY SYSTEM ACCESSORIES on Page 116.
Interface
10/100BaseT, half/full duplex.
Rate auto-negotiated (802.3 compliant).
Protocols Used
IPv4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP, DES.
Optionally, AES.
Protocols Supported
Switched Layer 2 Transport with support for all common Ethernet
protocols, such as IPv6, NetBIOS, DHCP, IPX.
Software Upgrade Path Remotely downloaded into flash memory
Network Management HTTP, telnet, FTP, SNMP
Wind 118 miles/hour (190 km/hour)
Operation Temperature
−40° F to +131º F (−40° C to +55° C)
Weight 1 lb (0.45 kg) without passive reflector.
Reflector Dish Weight 6.5 lb (2.9 kg) with assembly, without module
Dimensions 11.75” H x 3.4” W x 3.4” D (29.9 cm H x 8.6 cm W x 8.6 cm D)
Reflector Dish Dimensions 18” H x 24” W (45.7 cm H x 61.0 cm W)
Mean Time Between
Failure (MTBF)
40 years
Mean Time to Repair 15 minutes
Issue 5 Page 118 of 119