User manual

SM User Manual January 2004
Software Release 4.1
To invoke the RSSI Only Aiming Mode, the operator
1. selects the frequency of the AP in the Configuration Page of the SM. See Custom RF
Frequency Scan Selection List on Page 87.
2. clicks the Enable button on the RSSI Only Mode line of the Alignment page.
3. clicks the Enable Aiming Mode button. (The aiming procedure is described on Page 79.)
8.11 SPECTRUM ANALYZER PAGE
An example of the Alignment screen is displayed in Figure 53.
Figure 53: Spectrum Analyzer screen
The Spectrum Analyzer web page displays the power level in both RSSI and dBm units for each
frequency that is analyzed. Either the Spectrum Analyzer page must be set to automatically refresh
or the operator must repeatedly click the Enable button to keep current data displayed.
Issue 5 Page 113 of 119