User manual

SM User Manual January 2004

Software Release 4.1

Figure 55: BER Results screen ......................................................................................................114

Figure 56: Bridge Table screen ......................................................................................................115

LIST OF TABLES

Table 1: Definitions of Canopy components .....................................................................................16

Table 2: Range of links with and without Passive Reflector .............................................................17

Table 3: Categories of MIB-II objects ...............................................................................................32

Table 4: Canopy Enterprise MIB objects for APs, SMs, and BHs ....................................................34

Table 5: Canopy Enterprise MIB objects for APs and BH timing masters........................................35

Table 6: Canopy Enterprise MIB objects for SMs and BH timing slaves..........................................38

Table 7: Example 2.4-GHz channel assignment by sector...............................................................63

Table 8: Example 5.2-GHz channel assignment by sector...............................................................64

Table 9: Example 5.7-GHz channel assignment by sector...............................................................64

Table 10: Subnet masks for Network Classes A, B, and C ..............................................................66

Table 11: SM status LEDs ................................................................................................................70

Table 12: Module auto-sensing per MAC address ...........................................................................71

Table 13: Specifications..................................................................................................................117

LIST OF PROCEDURES

Procedure 1: Replacing the Canopy logo .........................................................................................26

Procedure 2: Denying all remote access ..........................................................................................28

Procedure 3: Reinstating remote access capability..........................................................................29

Procedure 4: Installing the Canopy Enterprise MIB files ..................................................................32

Procedure 5: Auto-updating SMs......................................................................................................57

Procedure 6: Enabling spectrum analysis ........................................................................................59

Procedure 7: Invoking the low power mode......................................................................................60

Procedure 8: Fabricating an override plug........................................................................................74

Procedure 9: Regaining access to the module.................................................................................74

Procedure 10: Extending network sync ............................................................................................74

Procedure 11: Bypassing proxy settings to gain access module web pages...................................75

Procedure 12: Setting mandatory Configuration page parameters ..................................................76

Procedure 13: Setting optional Configuration page parameters.......................................................76

Procedure 14: Installing the SM........................................................................................................77

Procedure 15: Verifying system performance...................................................................................80

Issue 5 Page 11 of 119