User manual

SM User Manual January 2004
Software Release 4.1
8.6 AP EVAL DATA PAGE
The AP Eval Data web page provides information about the AP that the SM sees. An example of
such information is shown in Figure 50.
NOTE: In Release 4.0 and later releases, the data for this page can be suppressed by the
Disable Display of AP Eval Data selection in the SM Scan Privacy field of the
Configuration page on the AP.
Figure 50: Example AP Eval Data page
8.6.1 AP Eval Data Parameters
The AP Eval Data page provides the following parameters that can be useful to manage and
troubleshoot a Canopy system:
Index
This field displays the index value that the Canopy system assigns (for only this page) to the AP
where this SM is registered.
Frequency
This field displays the frequency that the AP transmits.
ESN
This field displays the MAC address (electronic serial number) of the AP.
Jitter
This field displays the last jitter value that was captured between this SM and the AP.
Range
This field displays the distance in feet between this SM and the AP. To derive the distance in
meters, the operator should multiply the value of this parameter by 0.3048.
Issue 5 Page 107 of 119