Radio User Manual

14
English
GETTING STARTED
Desktop Rapid Charger
To Charge the Battery
a Remove the battery from the charger and use a
pencil eraser to clean the three metal contacts
on the back of the battery. Replace the battery
in the charger. If the LED indicator continues to
flash red, consult your dealer.
b A standard battery may require 90 minutes to
charge to 90% capacity.
1 Turn the radio off.
2 Place the battery, with or without the radio, in
the charger pocket.
• The charger LED indicates the charging
progress.
LED color Status
No LED Indication Battery inserted incorrectly
or battery not detected.
Single Green Flash Successful charger
power-up.
Flashing Red
a
Battery unchargeable or not
making proper contact.
Red Battery is charging.
Flashing Yellow Battery in charger but
waiting to be charged. The
battery temperature may be
too hot or too cold. The
voltage may be lower than
the predetermined threshold
level for charging.
Flashing Green
b
Battery 90% (or more)
charged.
Green Battery fully charged.