Specifications

4 - 2 Symbol SE6700 Integration Guide
20 AIM_EN* I Laser Aiming Control
A low turns the AIM laser on.
A high turns the AIM laser off.
19 PIX_DATA0 O Pixel Data Bit 0 (LSB)
18 PIX_DATA1 O Pixel Data Bit 1
17 PIX_DATA2 O Pixel Data Bit 2
16 PIX_DATA3 O Pixel Data Bit 3
15 PIX_DATA4 O Pixel Data Bit 4
14 PIX_DATA5 O Pixel Data Bit 5
13 PIX_DATA6 O Pixel Data Bit 6
12 PIX_DATA7 O Pixel Data Bit 7
11 LEFT_DSBL I Left Illumination Control
A high disables the left illumination LED bank
when ILLUM_EN* is low.
A low enables the left illumination LED bank
when ILLUM_EN* is low.
10 FRAME_VALID O Valid Frame Pixel Data
9 OSC_EN I Oscillator Enable
8 STROBE End of Sensor Reset
7 I2C_SDA I/O
I
2
C-BUS Data Line
6 I2C_SCL I
I
2
C-BUS Clock Line
5 OE I Output Enable
4 N/C - No Connect
3 STANDBY I Standby Mode
2 RIGHT_DSBL I Right Illumination Control
A high disables the right illumination LED bank
when ILLUM_EN* is low.
A low enables the right illumination LED bank
when ILLUM_EN* is low.
1 SCAN_STAND* O Scan Stand Mode
Table 4-1 Symbol SE6700 Signal Information (Continued)
Pin
Number
SE6700 Signal
Name
I/O Notes