User guide

Datebook

Set the Repeat Interval

To specify that an event repeats or happens on a recurring basis:

Set the Alarm

You can set an alarm to alert you at a speciﬁed time interval before the event occurs:

If you select a

Custom alarm setting:

Press To

CHANGE (+) select Repeat

S scroll to a repeat setting

You can set the event to repeat at the following intervals:

None, Daily,

Weekly, Monthly on day (for example, the second Tuesday of each

month),

Monthly on date (for example, the 15th of every month), or

Yearly.

SELECT (+) select the repeat setting

Press To

CHANGE (+)

select the

ã (alarm) indicator

S scroll to the time interval at which you want to be alerted before the

event occurs

You can set the alarm to the following time intervals: Off, 5 min before,

10 min before, 30 min before, 1 hour before, 1 day before,

1 week before, or Custom.

SELECT (+) select the alarm setting

Note: If you select

Custom, go to the procedure that immediately

follows to set a custom time interval for the alarm.

DONE (-) store the entire event

Press To

S scroll to a numerical value from 0 to 99

} (+)

move to the time interval ﬁeld

S scroll to the desired time interval: min, hrs, days, or wks

DONE (-) store the alarm