User guide

Release 9.4.2 Release Notes
Issue 1, May 2009 Page 8
Product Name
Previous
Name
Older Name
Model
Number
(example)
PTP 49200 Series
—
Canopy 4.9-GHz OFDM BH
4940BH
PMP 500 Series
—
Canopy 3.5-GHz OFDM PMP
—
CAP 35500
—
3.5-GHz OFDM AP
3540AP
CSM 35500
—
3.5-GHz OFDM SM
3540SM
1.4 IDENTIFYING HARDWARE SERIES (P7, P8, P9, P10, P11)
The following methods can be used to identify the hardware series of a module:
 For modules that are running Release 8 or Release 9, look on the Home =>
General Status tab, under Board Type as shown in Figure 1.
Figure 1: Board Type on modules running Release 8
 For modules that are running Release 7.3.6, view the Configuration web
page.
◦ If a Scheduling option is present, as shown in Figure 2, then the hardware series
is P9.
Figure 2: Scheduling option – if viewable, indicates this is a P9 board.
◦ If no Scheduling option is present, then the series is either P7 or P8.
 For modules running any release, open a telnet interface to the module
and enter version. The hardware series is shown under Hardware
Platform as 7, 8, 9, 10, or 11.
1.5 DOCUMENT CHANGE HISTORY
Issue 1
First issue