User guide

Release 9.4.2 Release Notes
Issue 1, May 2009 Page 27
a. Refresh/Discover.
b. Check whether the resulting elements list shows the SM as operating on the new
release.
c. If it does not, reboot the problem SM.
d. Check whether the SM is shown as operating on Release 9.4.2.
e. If it is not, re-initiate the upgrade of the SM using CNUT or Prizm.
14. Disable SM Auto-update on CNUT or Prizm, according to CNUT help file or Prizm
documentation.
7.4.1 Setting the Region Code
After a sector or link or standalone module has been upgraded to Release 9.4.2, confirm that the
Region Code on each module is set to the local region. If needed, set the Region Code and
associated parameters correctly on each module, Save Changes, and Reboot.
On new APs or BHMs, or APs or BHMs that have been reset to factory defaults, the Region Code
must be set before the module will transmit.