User guide

Canopy System User Guide Specifications and Limitations
pmp-0229 (Mar 2013)
75
Specifications and Limitations
Radios
Radio specifications are provided at
• http://www.cambiumnetworks.com/products/index.php?id=ptp100
for PTP bridges.
• http://www.cambiumnetworks.com/products/index.php?id=pmp100 for PMP modules.
Cluster Management Products
CMM specifications are provided in the documents that support the various models of CMM.
600SS Surge Suppressor
600SS Surge Suppressor specifications are as follows:
Dimensions H 5.2" x W 5.0" x D 1.7" (132 mm x 127 mm x 43.2 mm)
Space between mounting holes
4.24" (108 mm)
Size of Knockouts
0.75" (19 mm)
Weight
0.4 lbs
Operating Temperature −40°C to +55°C (−40°F to 131°F)
Internal Connectors RJ-45
Capacity
1500J peak energy dissipation with 10/10000 micro sec
waveform
Digital Noise Isolation Option
(to eliminate ground loops)
Yes
NOTE:
The 600SS surge surpressor is shipped in the “isolated” position (pin 4 isolated
by 68V from protective earth). If packet error issues occur over the Ethernet
link (verify by pinging the device through the 600SS), configure the 600SS to
“grounded” position (by moving the 600SS switch from “isolated” to “ground”)
to
avoid ground loops that may be present in the system.