User guide

Canopy System User Guide Network Components

pmp-0229 (Mar 2013)

Table 11: Recommended antenna cables

Best-Tronics

Part # Description

BT-0564 N TO N GPS antenna cable for CMM2

BT-0716

BNC TO N GPS antenna cable for CMMmicro

and CMM4

Category 5 Cable Tester

For purchase within the U.S.A., the CTCAT5-01 Cable Tester is available.

Override Plug

An override plug (sometimes called a default plug) is available to provide access to a module

whose password and/or IP address have been forgotten. This plug allows the AP, SM, or BH to be

accessed using IP address 169.254.1.1 and no password. During the override session, you can

assign any new IP address and set either or both user passwords (display-only and/or full access)

as well as make other parameter changes.

This plug is available from Best-Tronics Manufacturing, Inc. at

http://www.best-tronics.com/cambium.htm

as Part BT-0583 (RJ-11 Default Plug). Alternatively if

you wish, you can fabricate an override plug. For instructions, see Procedure 34 on Page 433 and

the pinout in

Figure 150 on Page 434.

Alignment Headset

The ACATHS-01 Alignment Headset facilitates the

operation of precisely aiming an SM toward an AP

(or a BHS toward a BHM). This device produces

infinitely variable

• pitch, higher when the received signal is stronger.

• volume, louder when jitter is less.

An ACATHS-01 is pictured in Figure 22.

Pinouts for an alternative listening device are

provided under Alignment Tone—Technical

Details on Page 189.

Figure 22: ACATHS-01 alignment

headset