User guide

Canopy System User Guide Glossary
pmp-0229 (Mar 2013)
613
Region Code
A parameter that offers multiple fixed selections, each of which
automatically implements either the Dynamic Frequency Selection
(DFS) standard that is required by law or regulatory to apply or no
DFS, based on the frequency band range and the selected region.
Registrations MIB
Management Information Base file that defines registrations for global
items such as product identities and product components. See also
Management Information Base.
repl-m
A command that sets up the database replication process on a
Bandwidth and Authentication Manager (BAM) master server, uses
SFTP to copy both the database and the repl-s script to a BAM
slave server, and remotely executes the repl-s script on the BAM
slave server. See Master, Slave, repl-s, Secure Shell, and SFTP.
repl-s
A command that sets up the database replication process on a
Bandwidth and Authentication Manager (BAM) slave server. See
Master, Slave, and repl-m.
RES
Result. A field in the data that the cmd show esn command
generates from the SQL database in the Bandwidth and Authentication
Manager (BAM) server.
RetransLimitExp Field
This field displays how many times the retransmit limit has expired.
RF
Radio frequency. How many times each second a cycle in the antenna
occurs, from positive to negative and back to positive amplitude.
RJ-11
Standard cable that is typically used for telephone line or modem
connection.
RJ-45
Standard cable that is typically used for Ethernet connection. This
cable may be wired as straight-through or as crossover. Later modules
auto-sense whether the cable is straight-through or crossover.
Router
Network element that uses the logical (IP) address of another to pass
data to only the intended recipient. Compare to Switch and Bridge.
RPM
Red Hat
®
Package Manager.
rpm
A command that the Linux
®
operating system accepts to identify the
version of Linux
®
software that operates on the Bandwidth and
Authentication Manager (BAM) server.
RSSI
Radio Signal Strength Indicator. A relative measure of the strength of
a received signal. An acceptable link displays an RSSI value of greater
than 700.
RxBabErr Field
This field displays how many receiver babble errors occurred.
RxOverrun Field
This field displays how many receiver overrun errors occurred on the
Ethernet controller.