User guide

Procedures for Troubleshooting Administering Modules through Telnet
Interface
582
pmp-0229 (Mar 2013)
Command System help Definition Notes
lsweb
List Flash Web files
Syntax: lsweb. Lists the file names of the saved
custom web files.
ping
10
Send ICMP ECHO_REQUEST
packets to network hosts
Syntax: ping IPaddress. Sends an ICMP
ECHO_REQUEST to IPaddress and waits for
a response. If a response is received, the system
returns IPaddress is alive.
If no response is received, the system returns no
answer from
IPaddress.
reset
Reboot the unit
Syntax:
reset
. Forces the module to perform a
hard (FPGA and CPU) module reset. (See
fpga_conf
.)
rm
Remove (unlink) files
Syntax:
rm
filename. Remove filename.
syslog
Display system event log:
syslog <optional
filename>
Syntax: syslog. Displays the contents of the
system log. Syntax: syslog filename. Saves
the contents of the system log to filename.
Caution: overwrites filename if it already
exists.
telnet
Telnet application
Syntax:
telnet
hostIPaddress. Launches
the telnet client application on the module.
tftp
tftp application
Syntax: tftp hostIPaddress. Launches the
tftp client application on the module.
update
Enable automatic SM code
updating
Syntax:
update
actionlist.txt. Enables
the automated update procedure that
actionlist.txt specifies. (Supported for
only the Access Point Module.)
updateoff
Disable automatic SM
code updating
Syntax: updateoff. Disables the
automated update procedure.
version
Display the software
version string
Syntax:
version
. Displays the module
version string, which contains the
software/firmware/hardware versions, the
module type, and the operating
frequency.
10
See Module Has Lost or Does Not Establish Connectivity on Page 483.