User guide

Canopy System User Guide Setting Up a Protocol Analyzer on Your
Network
pmp-0229 (Mar 2013)
567
Figure 200: Wireshark Capture window
NOTE: This window graphically displays the types of packets (by percentage) that are
being captured.
17. If all packet types are displayed with 0%, either
◦ launch your Web browser on the subscriber PC for the IP address of the SM
◦ ping the SM from the home PC.
18. If still all packet types are displayed with 0% (meaning that no traffic is being
captured), reconfigure IP addressing until you can successfully see traffic
captured on the laptop computer.
19. Whenever the desired number of packets have been captured, click Stop.
RESULT: When you stop the packet capture, the <capture> - Wireshark window
opens