User guide

Canopy System User Guide Setting Up a Protocol Analyzer on Your
Network
pmp-0229 (Mar 2013)
565
Figure 198: Internet Protocol (TCP/IP) Properties window
6. Unless you have a static IP address configured on the SM, select
Obtain an IP address automatically for the protocol analyzer laptop computer.
If you have configured a static IP address on the SM, then
a. select Use the following IP address.
b. enter an IP address that is in the same subnet as the SM.
7. Click OK.
8. Open your web browser.
9. Enter the IP address of the SM.
RESULT: The General Status tab of the SM opens, as shown in Figure 69 on
Page 207.
10. If the General Status tab did not open, reconfigure how the laptop computer
obtains an IP address.
11. Verify that you have connectivity from the laptop computer to the SM with the hub
inserted.
12. Launch the protocol analyzer software on the laptop computer.
13. In the Capture menu, select Start.
RESULT: The Wireshark Capture Options window opens