User guide

560
pmp-0229 (Mar 2013)
Setting Up a Protocol Analyzer on Your Network Maintaining Your Software
Procedure 41: Returning a module to its original logo and hyperlink
1. Use a telnet session and the clearwebfile command to clear all custom files from
the file system of the module, as in the example session shown in Figure 193
below.
>telnet ModuleIPAddress
/---------\
C A N O P Y
Cambium Networks
(Copyright 2001-2012 Cambium Networks)
Login: root
Password: <password-if-configured>
Telnet +> lsweb
Flash Web files
canopy.jpg 7867
free directory entries: 31
free file space: 56468
Telnet +> clearwebfile
Telnet +> lsweb
Flash Web files
free directory entries: 32
free file space 64336 bytes
Telnet +> exit
Figure 193: Example telnet session to clear custom files
Setting Up a Protocol Analyzer on Your Network
Selection of protocol analyzer software and location for a protocol analyzer depend on both the
network topology and the type of traffic to capture. However, the examples in this section are
based on free-of-charge Wireshark software, which is available at http://www.wireshark.com