User guide

558
pmp-0229 (Mar 2013)
Rebranding Module Interface Screens Maintaining Your Software
> ftp ModuleIPAddress
Connected to ModuleIPAddress
220 FTP server ready
Name (ModuleIPAddress:none): root
331 Guest login ok
Password: <password-if-configured>
230 Guest login ok, access restrictions apply.
ftp> binary
200 Type set to I
ftp> put canopy.jpg
OR
put advantaged.jpg
OR
put top.html
ftp> quit
221 Goodbye
Figure 191: Example ftp session to transfer custom logo file
3. Use a telnet session and the addwebfile command to add the new file to the
file system, as in the example session shown in Figure 192.
NOTE:
Supported telnet commands execute the following results:
◦ addwebfile adds a custom logo file to the file system.
◦ clearwebfile clears the logo file from the file system.
◦ lsweb lists the custom logo file and display the storage
space available on the file system.