User guide

548
pmp-0229 (Mar 2013)
Using the SM Configuration Tool (AP, BHM) Using Tools in the GUI
6. started transmitting on 5590 MHz.
Using the SM Configuration Tool (AP, BHM)
The SM Configuration tab in the Tools page of the AP or BHM displays
• the current values whose control may be subject to the setting in the Configuration Source
parameter.
• an indicator of the configuration source for each value.
o (SM) – QoS/VLAN parameters are derived from the SM’s settings
o (APCAP) – QoS/VLAN parameters are derived from the AP’s settings, including any
keyed capping (for radios capped at 4 Mbps, 10 Mbps, or 20 Mbps)
o (D) – QoS/VLAN parameters are retrieved from the device, due to failed retrieval from
the AAA or WM server.
o (AAA) – QoS/VLAN parameters are retrieved from the RADIUS server
o (BAM) – QoS/VLAN parameters are retrieved from a WM BAM server
An example of the SM Configuration tab is displayed in Figure 187.