User guide

540
pmp-0229 (Mar 2013)
Using the AP Evaluation or BHM Evaluation Tool
(SM, BHS)
Using Tools in the GUI
NoLUIDs
This field indicates how many times the AP has needed to reject a registration request from an SM
because its capacity to make LUID assignments is full. This then locks the SM out of making any
valid attempt for the next 15 minutes. It is extremely unlikely that a non-zero number would be
displayed here.
OutOfRange
This field indicates how many times the AP has rejected a registration request from an SM
because the SM is a further distance away than the range that is currently configured in the AP.
This then locks the SM out of making any valid attempt for the next 15 minutes.
AuthFail
This field displays how many times authentication attempts from this SM have failed in the AP.
EncryptFail
This field displays how many times an encryption mismatch has occurred between the SM and the
AP.
Rescan Req
This field displays how many times a re-range request has occurred for the BHM that is being
evaluated in the AP Eval page of a BHS.
SMLimitReached
This field displays 0 if additional SMs may be registered to the AP. If a 1 is displayed, the AP will
not accept additional SM registrations.
NoVC’s
This counter is incremented when the SM is registering to an AP which determines that no VC
resources are available for allocation. This could be a primary data VC or a high priority data VC.
VCRsvFail
This counter is incremented when the SM is registering to an AP which has a VC resource
available for allocation but cannot reserve the resource for allocation.
VCActFail
This counter is incremented when the SM is registering to an AP which has a VC resource
available for allocation and has reserved the VC, but cannot activate the resource for allocation.