User guide

Canopy System User Guide Interpreting Messages in the Event Log
(All)
pmp-0229 (Mar 2013)
505
• the types of event messages (which follow the time and date stamps and the file and line
references) are underscored as quoted in Table 74 and Table 75.
Figure 159: Event Log tab data, example
Messages that Flag Abnormal Events
The messages listed in Table 74 flag abnormal events and, case by case, may signal the need for
corrective action or technical support. See Troubleshooting on Page 570.
Table 74: Event Log messages for abnormal events
Event Message Meaning
Expected LUID = 6 Actual
LUID = 7
Something is interfering with the control messaging of the
module. Also ensure that you are using shielded cables to
minimize interference. Consider trying different frequency
options to eliminate or reduce interference.
FatalError()
The event recorded on the line immediately beneath this
message triggered the Fatal Error().
Loss of GPS Sync Pulse
Module has lost GPS sync signal.
Machine Check Exception
This is a symptom of a possible hardware failure. If this is
a recurring message, begin the RMA process for the
module.
RcvFrmNum = 0x00066d
ExpFrmNum = 0x000799
Something is interfering with the control messaging of the
module. Also ensure that you are using shielded cables to
minimize interference. Consider trying different frequency
options to eliminate or reduce interference.
System Reset Exception -- External
Hard Reset
The unit lost power or was power cycled.
System Reset Exception -- External
Hard Reset WatchDog
The event recorded on the preceding line triggered this
WatchDog message.