User guide

Canopy System User Guide MIB Viewers
pmp-0229 (Mar 2013)
497
Traps Provided in the Canopy Enterprise MIB
Canopy modules provide the following SNMP traps for automatic notifications to the NMS:
• coldStart, which signals that the SNMPv2 element is reinitializing itself and that its
configuration may have been altered.
• warmStart, which signals that the SNMPv2 element is reinitializing such that its configuration
is unaltered.
• authenticationFailure, which signals that the SNMPv2 element has received a protocol
message that is not properly authenticated (contingent on the snmpEnableAuthenTraps object
setting).
• linkDown, as defined in RFC 1573
• linkUp, as defined in RFC 1573
• egpNeighborLoss, as defined in RFC 1213
• whispGPSInSync, which signals a transition from not synchronized to synchronized.
• whispGPSOutSync, which signals a transition from synchronized to not synchronized.
• whispRegComplete, which signals registration completed.
• whispRegLost, which signals registration lost.
• whispRadarDetected, which signals that the one-minute scan has been completed, radar has
been detected, and the radio will shutdown.
• whispRadarEnd, which signals that the one-minute scan has been completed, radar has not
been detected, and the radio will resume normal operation.
NOTE:
The PTP 300, 400, 500 600 series wireless Ethernet bridges do not support the
traps listed above.
MIB Viewers
Any of several commercially available MIB viewers can facilitate management of these objects
through SNMP. Some are available as open source software. Cambium does not endorse, support,
or discourage the use of any these viewers.
MIB viewers are available and/or described at the following web sites:
• http://ns3.ndgsoftware.com/Products/NetBoy30/mibbrowser.html
• http://www.adventnet.com/products/snmputilities/