User guide

Canopy System User Guide Objects Defined in the Canopy Enterprise
MIB
pmp-0229 (Mar 2013)
467
• Accessing Subnet, which specifies the subnet mask that allows managers to poll the agents.
Canopy modules can also be configured to send traps to specified IP addresses, which can be those
of Prizm or NMS servers, for example. The parameter for this address is named Trap Address.
Objects Defined in the Canopy Enterprise MIB
The Canopy Enterprise MIB defines separate sets of objects for
• all radio modules (objects common to all devices)
• APs and BH timing masters
• SMs and BH timing slaves
• CMMmicros
• CMM4s
NOTE:
The PTP 300, 400, 500, and 600 series wireless Ethernet bridges do not support
these objects.
AP, SM, and BH Objects
The objects that the Canopy Enterprise MIB defines for all APs, SMs, and BHs are listed in Table
71.
Table 71: Canopy Enterprise MIB objects for APs, SMs, and BHs
Name OID valueType
whispBoxSoftwareVer.0 .1.3.6.1.4.1.161.19.3.3.1.1.0 OctetString
whispBoxFPGAVer.0 .1.3.6.1.4.1.161.19.3.3.1.2.0 OctetString
whispBoxEsn.0 .1.3.6.1.4.1.161.19.3.3.1.3.0 OctetString
whispBoxBoot.0 .1.3.6.1.4.1.161.19.3.3.1.4.0 OctetString
boxDeviceType.0 .1.3.6.1.4.1.161.19.3.3.1.6.0 OctetString
boxDeviceTypeID.0 .1.3.6.1.4.1.161.19.3.3.1.7.0 OctetString
boxEncryption.0 .1.3.6.1.4.1.161.19.3.3.1.8.0 OctetString