User guide

Canopy System User Guide
pmp-0229 (Mar 2013)
417
Chapter 20: Verifying System
Functionality
To verify system functionality after the APs and or BHs have been installed, perform the
following steps.
Procedure 30: Verifying system functionality
1. For each installed AP, use a computer or PDA connected to an SM set to a
compatible configuration (frequency and color code, for example) and verify link
functionality.
2. For each BH installed, use a notebook computer connected to a BH (BHM or
BHS, as appropriate) set to a compatible configuration and verify link
functionality.
3. If a network data feed is present and operational, use an SM or BHS to verify
network functionality.