User guide

Network Components Exploring the Scope of Solutions
36
pmp-0229 (Mar 2013)
Protocol
Type
Product
Series
Product
Name
Previous Names
Example
Model
PTP 130 PTP 100 Full, BH20 (14-Mbps) 5700BH20
PTP 200
PTP 49200 4.9-GHz OFDM BH 4940BH
PTP 54200 5.4-GHz OFDM BH 5440BH
NOTE:
Each product is available in multiple model numbers, which distinguish the model by such
attributes as frequency band range, encryption type, or power adjustable for extended range.
See
Interpreting Model Number on Page 76 and Sorted Model Numbers on Page 78.
Network Components
Cambium fixed wireless broadband IP networks use some or all of the following components. For
the components that provide a graphical user interface (GUI), access to the GUI is through a web
browser. In Release 8 and later, cascading style sheets (CSS) configure the GUI. Thus an operator
is able to customize the GUI by editing these style sheets.
Access Point Module Other Than 900-Mhz
The FSK Access Point (AP) module provides up to 14 Mbps aggregate throughput in a 60° sector.
The CAP 120 FSK AP can communicate with only a CSM 120 SM, not also a CSM 130 or a Lite
(CSM 110) SM. The CAP 130 or CAP 09130 AP distributes services as broadly as the CAP 120.
However, the CAP 130 provides greater throughput and less latency. The CAP 130 communicates
with all SMs in its frequency band range: CSM 110s, CSM 120s, and CSM 130s.
The OFDM AP provides up to 21 Mbps aggregate throughput in a 90° sector. An OFDM AP can
communicate with only an OFDM SM.
An FSK or OFDM AP supports up to 200 subscribers and 4,096 MAC addresses, which may be
directly-connected PCs, IP appliances, gateways, Subscriber Modules (SMs), and the AP, except
that no limit applies behind subscriber network address translation (NAT) gateways. The AP is
configurable through a web interface.