User guide

Canopy System User Guide Installing an SM
pmp-0229 (Mar 2013)
395
Installing a GPS Antenna
For instructions on GPS antenna installation, see the user guide that is dedicated to the CMM/UGPS
products.
Installing a Cluster Management Module
For instructions on CMM2 (Cluster Management Module 2), CMM3 (CMMmicro), or CMM4 installation,
including the outdoor temperature range in which it is acceptable to install the unit, tools required,
mounting and cabling instructions, and connectivity verification, see the user guide that is dedicated to that
particular product.
Installing an SM
Configuring the Laptop for Connection to SMs
Windows Laptop
To configure a Windows laptop for connection to SMs for installation, perform the following steps.
Procedure 20: Configuring a Windows laptop
1. Select StartControl Panel.
2. Select Network and Internet Connections (or the similarly labeled category).
3. Select
◦ Network Connections, if your platform is XP.
◦ Manage Network Connections, if your platform is Vista.
4. Right click on a LAN whose status is shown as Connected and select Properties from
the drop-down list.
5. Click to highlight Internet Protocol (TCP/IP).
NOTE An example is shown in Figure 133.