User guide

Installing a Connectorized Flat Panel Antenn
Installing Components
394
pmp-0229 (Mar 2013)
Weatherproofing a 900 MHz Connectorized Antenna
To prevent moisture from ingressing the rear of the antenna, following the procedure below:
Procedure 19: Weatherproofing the 900 MHz connectorized antenna
1. Using an elastomeric polyurethane-based coating (such as a spray-on truck bed liner),
cover each of the plastic standoffs located on the rear of the antenna.
Figure 131: Sealing 900MHz antenna standoffs
2. Using a silicone caulking, seal the gap between the radio and antenna.
Figure 132 Sealing between the 900MHz radio and antenna
Seal Each
Remove mounting plate to seal
standoffs beneath