User guide
Installing an AP
Installing Components
390
pmp-0229 (Mar 2013)
Figure 127: OFDM AP attached to pole or
tower
Figure 128: OFDM antenna lower bracket with quick-connect
12. Remove the cover of the 600SS Surge Suppressor.
13. With the cable openings facing downward, mount the 600SS as close as possible to the
point where the Ethernet cable will penetrate the residence or building.
14. Using diagonal cutters or long nose pliers, remove the knockouts that cover the cable
openings to the 600SS.
15. Connect an Ethernet cable from the power adapter to either RJ-45 port of the 600SS.
16. Remove the bottom cover of the AP.
17. Secure a ground strap to the ground lug (circled in Figure 129) on the bottom of the AP.
18. Secure the ground strap to the pole, tower, or other trusted ground.