User guide

Configuring a BH Timing Slave for the
Destination
Configuring for the Destination
370
pmp-0229 (Mar 2013)
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.
Quality of Service (QoS) Tab of the BHS
An example of the Quality of Service tab of the BHS is displayed in Figure 115.
Figure 115: Quality of Service (QoS) tab of BHS, example
In the Quality of Service (QoS) tab of the BHS, you may set the following parameters.
Low Priority Uplink CIR
See
• Committed Information Rate on Page 85
• Setting the Configuration Source on Page 324.
Low Priority Downlink CIR
See
• Committed Information Rate on Page 85
• Setting the Configuration Source on Page 324.
Security Tab of the BHS
An example of the Security tab in a BHS is displayed in Figure 116.