User guide

Configuring a BH Timing Slave for the
Destination
Configuring for the Destination
366
pmp-0229 (Mar 2013)
• confirm that the power setting is compliant following any reset of the module to factory
defaults.
For information on how to calculate the permissible transmitter output power to enter in this
parameter, see Adjusting Transmitter Output Power on Page 382.
The Radio tab also provides the following buttons.
Save Changes
When you click this button, any changes that you made on this tab are recorded in flash memory.
However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.
SNMP Tab of the BHS
An example of the SNMP tab in a BHS is displayed in Figure 114.