User guide

Configuring a BH Timing Master for the
Destination
Configuring for the Destination
352
pmp-0229 (Mar 2013)
Priority Precedence
Allows operator to decide if 802.1p or DiffServ priority bits should be used first when making
priority decisions.
PPPoE Control Message Priorty
Operators may configure the device to utilize the high priority channel for PPPoE control
messages. Configuring the device in this fashion can benefit the continuity of PPPoE connections
when there are issues with PPPoE sessions being dropped in the network. This prioritization may
be configured in the DiffServ tab in the Configuration menu of the device.
The Diffserv tab also provides the following buttons.
Save Changes
When you click this button, any changes that you made on the Configuration page are recorded in
flash memory. However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.
Protocol Filtering Tab of the BHM
An example of the Protocol Filtering tab in a BHM is displayed in Figure 98.