User guide

Canopy System User Guide Configuring a BH Timing Master for the
Destination
pmp-0229 (Mar 2013)
343
Site Contact
Enter contact information for the module administrator. This parameter is written into the
sysContact SNMP MIB-II object and can be polled by an NMS. The buffer size for this field is
128 characters.
Site Location
Enter information about the physical location of the module. This parameter is written into the
sysLocation SNMP MIB-II object and can be polled by an NMS. The buffer size for this field is
128 characters.
The SNMP tab also provides the following buttons.
Save Changes
When you click this button, any changes that you made on the Configuration page are recorded in
flash memory. However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.
Security Tab of the BHM
An example of the Security tab in a BHM is displayed in Figure 106.