User guide

Configuring a BH Timing Master for the
Destination
Configuring for the Destination
342
pmp-0229 (Mar 2013)
The default treatment is to allow all networks access. You are allowed to specify as many as 10
different accessing IP address, subnet mask combinations.
SNMP Trap Server DNS Usage
The management DNS domain name may be toggled such that the name of the trap server only
needs to be specified and the DNS domain name is automatically appended to that name. The
default SNMP trap server addresses for all 10 available servers is 0.0.0.0 with the appending of the
DNS domain name disabled.
Trap Address
1 to 10
Specify ten or fewer IP addresses (xxx.xxx.xxx.xxx) to which trap information should be sent.
Trap information informs Prizm or an NMS that something has occurred. For example, trap
information is sent
• after a reboot of the module.
• when Prizm or an NMS attempts to access agent information but either
o supplied an inappropriate community string or SNMP version number.
o is associated with a subnet to which access is disallowed.
Sync Status
If you want sync status traps (sync lost and sync regained) sent to Prizm or an NMS, select
Enabled. If you want these traps suppressed, select Disabled.
Session Status
If you want session status traps sent to Prizm or an NMS, select Enabled. For the names and
descriptions of session status traps, see Traps Provided in the Canopy Enterprise MIB on Page
497. If you want these traps suppressed, select Disabled.
Site Information Viewable to Guest Users
Operators can enable or disable site information from appearing when a user is in GUEST account
mode.
Site Name
Specify a string to associate with the physical module. This parameter is written into the sysName
SNMP MIB-II object and can be polled by an NMS. The buffer size for this field is 128
characters.