User guide

Canopy System User Guide Configuring a BH Timing Master for the
Destination
pmp-0229 (Mar 2013)
339
Save Changes
When you click this button, any changes that you made on the IP Configuration page are recorded
in flash memory. However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.
SNMP Tab of the BHM
An example of the SNMP tab in a BHM is displayed in Figure 105.