User guide

Configuring an SM for the Destination Configuring for the Destination
322
pmp-0229 (Mar 2013)
PPPoE Session Uptime
This field indicates the total uptime of the current PPPoE session.
NAT Port Mapping Tab of the SM
An example of the NAT Port Mapping tab in an SM is displayed in Figure 100.
Figure 100: NAT Port Mapping tab of SM, example
In the NAT Port Mapping tab of the SM, you may set the following parameters.
Port Map 1 to 10
Separate parameters allow you to distinguish NAT ports from each other by assigning a unique
combination of port number, protocol for traffic through the port, and IP address for access to the
port.
Unit Settings Tab of the SM
An example of the Unit Settings tab in an SM is displayed in Figure 101.