User guide

Configuring an SM for the Destination Configuring for the Destination
312
pmp-0229 (Mar 2013)
Default Port VID
This is the value of the parameter of the same name, configured above.
MAC Address VID Map
This is the listing of the MAC address VIDs configured in Port VID MAC Address Mapping.
Management VID
This is the value of the parameter of the same name, configured above.
SM Management VID Pass-Through
This is the value of the parameter of the same name, configured above.
Dynamic Ageing Timeout
This is the value of the VLAN Aging Timeout parameter configured above.
Allow Learning
Yes is displayed if the value of the Dynamic Learning parameter above is Enabled. No is
displayed if the value of Dynamic Learning is Disabled.
Allow Frame Type
This displays the selection that was made from the drop-down list at the Allow Frame Types
parameter above.
QinQ
This is set to Enabled if VLAN Port Type is set to QinQ, and is set to Disabled if VLAN Port
Type is set to Q.
QinQ EthType
This is the value of the QinQ EtherType configured in the AP.
Allow QinQ Tagged Frames
This is the value of Accept QinQ Frames, configured above.
Current VID Member Set, VID Number
This column lists the ID numbers of the VLANs in which this module is a member, whether
through assignment or through dynamic learning.