User guide

Configuring an SM for the Destination Configuring for the Destination
302
pmp-0229 (Mar 2013)
Site Location
Enter information about the physical location of the module. This parameter is written into the
sysLocation SNMP MIB-II object and can be polled by Prizm or an NMS. The buffer size for this
field is 128 characters.
The SNMP tab also provides the following buttons.
Save Changes
When you click this button, any changes that you made on the Configuration page are recorded in
flash memory. However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.
Quality of Service (QoS) Tab of the SM
An example of the Quality of Service (QoS) tab in the SM is displayed in Figure 93.
Figure 93: Quality of Service (QoS) tab of SM, example