User guide

Configuring an AP for the Destination Configuring for the Destination
272
pmp-0229 (Mar 2013)
PPPoE Control Message Priorty
Operators may configure the AP to utilize the high priority channel for PPPoE control messages.
Configuring the AP in this fashion can benefit the continuity of PPPoE connections when there are
issues with PPPoE sessions being dropped in the network. This prioritization may be configured in
the DiffServ tab in the Configuration menu of the AP.
The Diffserv tab also contains the following buttons.
Save Changes
When you click this button, any changes that you made on all tabs are recorded in flash memory.
However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented
Protocol Filtering Tab of the AP
An example of the Protocol Filtering tab in an AP is displayed in Figure 98.