User guide

Canopy System User Guide Configuring an AP for the Destination
pmp-0229 (Mar 2013)
269
Save Changes
When you click this button, any changes that you made on this tab are recorded in flash memory.
However, these changes do not apply until the next reboot of the module.
Reboot
When you click this button
1. the module reboots.
2. any changes that you saved by a click of the Save Changes button are
implemented.
VLAN Membership Tab of the AP
An example of the VLAN Membership tab of the AP is displayed in Figure 82.
Figure 82: VLAN Membership tab of AP, example
You may set the VLAN Membership tab parameter as follows.
VLAN Membership Table Configuration
For each VLAN in which you want the AP to be a member, enter the VLAN ID and then click the
Add Member button. Similarly, for any VLAN in which you want the AP to no longer be a
member, enter the VLAN ID and then click the Remove Member button.