User guide

Canopy System User Guide Configuring an AP for the Destination
pmp-0229 (Mar 2013)
259
Sustained Uplink Data Rate
Specify the rate that each SM registered to this AP is replenished with credits for transmission.
This default imposes no restriction on the uplink. See
• Maximum Information Rate (MIR) Parameters on Page 83
• Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
• Setting the Configuration Source on Page 324.
Uplink Burst Allocation
Specify the maximum amount of data to allow each SM to transmit before being recharged at the
Sustained Uplink Data Rate with credits to transmit more. See
• Maximum Information Rate (MIR) Parameters on Page 83
• Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
• Setting the Configuration Source on Page 324.
Sustained Downlink Data Rate
Specify the rate at which the AP should be replenished with credits (tokens) for transmission to
each of the SMs in its sector. This default imposes no restriction on the uplink. See
• Maximum Information Rate (MIR) Parameters on Page 83
• Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
• Setting the Configuration Source on Page 324.
Downlink Burst Allocation
Specify the maximum amount of data to allow the AP to transmit to any registered SM before the
AP is replenished with transmission credits at the Sustained Downlink Data Rate. See
• Maximum Information Rate (MIR) Parameters on Page 83
• Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
• Setting the Configuration Source on Page 324.
Broadcast Downlink CIR
Broadcast Downlink CIR (Committed Information Rate, a minimum) supports some system
designs where downlink broadcast is desired to have higher priority than other traffic. For many
other system designs, especially typical internet access networks, leave the Broadcast Downlink
CIR at the default.