User guide

Configuring a Point-to-Point Link for Test Testing the Components
232
pmp-0229 (Mar 2013)
• Generating sync indicates that the module is set to generate the sync pulse.
• Receiving Sync indicates that the module is set to receive a sync pulse from an outside source
and is receiving the pulse.
• ERROR: No Sync Pulse indicates that the module is set to receive a sync pulse from an
outside source and is not receiving the pulse.
NOTE:
When this message is displayed, the BHM transmitter is turned off to
avoid self-interference within the system.
Data Slots Down
This field indicates the number of frame slots that are designated for use by data traffic in the
downlink (sent from the backhaul slave to the backhaul master). See Max Range on Page 249 and
Downlink Data on Page 250.
Data Slots Up
This field indicates the number of frame slots that are designated for use by data traffic in the
uplink (sent from the backhaul master to the backhaul slave). See Max Range on Page 249 and
Downlink Data on Page 250.
Site Name
This field indicates the name of the physical module. You can assign or change this name in the
SNMP tab of the BHM Configuration page. This information is also set into the sysName SNMP
MIB-II object and can be polled by an SNMP management server.
Site Contact
This field indicates contact information for the physical module. You can provide or change this
information in the SNMP tab of the BHM Configuration page. This information is also set into the
sysName SNMP MIB-II object and can be polled by an SNMP management server.
Site Location
This field indicates site information for the physical module. You can provide or change this
information in the SNMP tab of the BHM Configuration page.
Time Updated and Location Code
This field displays information about the keying of the radio.