User guide

Configuring a Point-to-Point Link for Test Testing the Components
230
pmp-0229 (Mar 2013)
The Status page provides information on the operation of the module. This is the default web page
for the module. The Status page provides the following fields.
Device Type
This field indicates the type of the module. Values include the frequency band of the module, the
module type, timing mode, and the MAC address of the module.
Software Version
This field indicates the software release that is operated on the module, the release date and time
of the software release, the modulation rate capability, and whether the module is secured by DES
or AES encryption (see Encrypting Radio Transmissions on Page 428). When you request
technical support, provide the information from this field.
Board Type
This field indicates the series of hardware. See Designations for Hardware in Radios on Page 425.
FPGA Version
This field indicates the version of the field-programmable gate array (FPGA) on the module. If
you request technical support, provide the value of this field.
PLD Version
This field indicates the version of the programmable logic device (PLD) on the module. If you
request technical support, provide the value of this field.
Uptime
This field indicates how long the module has operated since power was applied.
System Time
This field provides the current time. If the BHM is connected to a CMM, then this field provides
GMT (Greenwich Mean Time). The BHS that registers to the BHM inherits the system time.
Last NTP Time Update
If the Time & Date page of the module specifies that time should be received from an NTP server,
then this field indicates when the time was last updated by a Network Time Protocol (NTP) server.