User guide

Canopy System User Guide Configuring a Point-to-Point Link for Test
pmp-0229 (Mar 2013)
229
2. While your browser is set to the General Status tab, note (or print) the values of
the following fields:
◦ Device type
◦ Software Version
◦ Board Type
◦ FPGA Version
3. Systematically ensure that you can retrieve this data when you prepare to deploy
the BHS.
4. Return your browser to the General Status tab of the BHM.
General Status Tab of the BHM
An example of a BHM General Status tab is displayed in Figure 74.
Figure 74: General Status tab of BHM, example