User guide

Configuring a Point-to-Point Link for Test Testing the Components
228
pmp-0229 (Mar 2013)
Region Code
This field indicates the region in which the radio is currently set to operate. When the appropriate
region has been set, the radio automatically implements the applicable required Dynamic
Frequency Selection (DFS) standard. For further information on DFS, see Radar Signature
Detection and Shutdown on Page 127.
The slave radio automatically inherits the DFS type of the master. This behavior ignores the value
of the Region Code parameter in the slave, even when the value is None. Nevertheless, since
future system software releases may read the value in order to configure some other region-
sensitive feature(s), this field should always indicate the value that corresponds to the local region.
Transmit Power Setting
This field displays the value of the Transmitter Output Power parameter in the module. See Table
60: Transmitter output power settings, example cases on Page 384.
Site Name
This field indicates the name of the physical module. You can assign or change this name in the
SNMP tab of the BHS Configuration page. This information is also set into the sysName SNMP
MIB-II object and can be polled by an SNMP management server.
Site Contact
This field indicates contact information for the physical module. You can provide or change this
information in the SNMP tab of the BHS Configuration page. This information is also set into the
sysName SNMP MIB-II object and can be polled by an SNMP management server.
Site Location
This field indicates site information for the physical module. You can provide or change this
information in the SNMP tab of the BHS Configuration page.
Time Updated and Location Code
This field displays information about the keying of the radio.
Continuing the Test of Point-to-Point Links
To resume the test, perform the following steps.
Procedure 15: Verifying and recording information from the BHS
1. Verify that the Session Status field of the General Status tab in the BHS
indicates REGISTERED.
NOTE: This indication confirms that the BHS is properly functional.