User guide

Configuring a Point-to-Point Link for Test Testing the Components
226
pmp-0229 (Mar 2013)
Antenna
The presence of this field depends on whether antenna options are available for the module. This
field indicates the polarity of the antenna in the modules as one of the following:
• Horizontal
• Vertical
• External (Connectorized)
Session Status
This field displays the following information about the current session:
• Scanning indicates that this SM currently cycles through the RF frequencies that are selected
in the Radio tab of the Configuration page.
• Syncing indicates that this SM currently attempts to receive sync.
• Registering indicates that this SM has sent a registration request message to the AP and has
not yet received a response.
• Registered indicates that this SM is both
o registered to an AP.
o ready to transmit and receive data packets.
• Alignment indicates that this SM is in an aiming mode. See Table 47 on Page 186.
Session Uptime
This field displays the duration of the current link. The syntax of the displayed time is hh:mm:ss.
Registered Backhaul
This field displays the MAC address of the BHM to which this BHS is registered.
Channel Frequency
This field indicates the current operating center frequency.