User guide

Canopy System User Guide Configuring a Point-to-Point Link for Test
pmp-0229 (Mar 2013)
223
WARNING!
From this point until you remove power from the BHS, stay at least as far from
the BHS as the minimum separation distance specified in
Table 43 on Page
174.
7. Plug the power supply into an electrical outlet.
8. Back at the computing device, on the left side of the BHM Time tab, click the
Home button. When the Home page opens to the General Status tab, click the
Session Status tab.
RESULT: The BHM opens the Session Status tab.
Beginning the Test of Point-to-Point Links
To begin the test of your BH link, in the Remote Subscribers tab of the BHM, click the link to the
BHS. The BHS GUI opens to the General Status tab of its Home page.
An example of the BHS General Status tab is displayed in Figure 73.