User guide

Canopy System User Guide Configuring a Point-to-Multipoint Link for
Test
pmp-0229 (Mar 2013)
217
Control Slots
This field indicates the number of (reserved) control slots configured by the operator. Control slots
are half the size of data slots. The SM uses reserved control slots and unused data slots for
bandwidth requests. See Control Slots on Page 250.
Site Name
This field indicates the name of the physical module. You can assign or change this name in the
SNMP tab of the AP Configuration page. This information is also set into the sysName SNMP
MIB-II object and can be polled by an SNMP management server.
Site Contact
This field indicates contact information for the physical module. You can provide or change this
information in the SNMP tab of the AP Configuration page. This information is also set into the
sysName SNMP MIB-II object and can be polled by an SNMP management server.
Site Location
This field indicates site information for the physical module. You can provide or change this
information in the SNMP tab of the AP Configuration page.
MP Double Rate
This field indicates whether 2X modulation rate is enabled for the sector.
Scheduling Type
This field indicates the type of frame scheduler that is active in the AP.
Advantage Radio Status
This field indicates whether the radio is operating as an Advantage or a standard radio.
Time Updated and Location Code
This field displays information about the keying of the radio.