User guide

Configuring a Point-to-
Multipoint Link for Te
Testing the Components
214
pmp-0229 (Mar 2013)
Device Type
This field indicates the type of the module. Values include the frequency band of the AP, its
module type, and its MAC address.
Software Version
This field indicates the system release, the time and date of the release, and whether
communications involving the module are secured by DES or AES encryption (see Encrypting
Radio Transmissions on Page 428). If you request technical support, provide the information from
this field.
Board Type
This field indicates the series of hardware. See Designations for Hardware in Radios on Page 425.
FPGA Version
This field indicates the version of the field-programmable gate array (FPGA) on the module. If
you request technical support, provide the value of this field.
PLD Version
This field indicates the version of the programmable logic device (PLD) on the module. If you
request technical support, provide the value of this field.
Uptime
This field indicates how long the module has operated since power was applied.
System Time
This field provides the current time. If the AP is connected to a CMM, then this field provides
GMT (Greenwich Mean Time). Any SM that registers to the AP inherits the system time.
Last NTP Time Update
This field displays when the AP last used time sent from an NTP server. If the AP has not been
configured in the Time tab of the Configuration page to request time from an NTP server, then this
field is populated by 00:00:00 00/00/00.
Ethernet Interface
This field indicates the speed and duplex state of the Ethernet interface to the AP.