User guide

Configuring a Point-to-
Multipoint Link for Te
Testing the Components
212
pmp-0229 (Mar 2013)
Advantage Radio Status
This field reflects whether the SM is currently licensed for enhanced caps (Advantage, also known
as Cap 2) on uplink and downlink traffic.
Time Updated and Location Code
This field displays information about the keying of the radio.
Continuing the Test of Point-to-Multipoint Links
To resume the test of links, perform the following steps.
Procedure 10: Verifying and recording information from SMs
1. Verify that the Session Status field of the General Status tab in the SM
indicates REGISTERED.
2. While you view the General Status tab in the SM, note (or print) the values of the
following fields:
◦ Device type
◦ Software Version
◦ Board Type
◦ FPGA Version
3. Systematically ensure that you can retrieve this data (from a database, for
example) when you later prepare to deploy the SM to subscriber premises.
4. Return to the Remote Subscribers tab of the AP.
5. Click the link of the next SM that you wish to test.
6. Repeat the test procedure from that point. When you have tested all of the SMs
that you intend to test, return your browser to the General Status tab of the AP.
General Status Tab of the AP
An example of the AP General Status tab is displayed in Figure 70.