User guide

Canopy System User Guide Configuring a Point-to-Multipoint Link for
Test
pmp-0229 (Mar 2013)
205
Sustained Uplink Data Rate
This field displays the value that is currently in effect for the SM, with the source of that value in
parentheses. This is the specified rate at which each SM registered to this AP is replenished with
credits for transmission. The configuration source of the value is indicated in parentheses. See
• Maximum Information Rate (MIR) Parameters on Page 83
• Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
• Setting the Configuration Source on Page 324.
Uplink Burst Allocation
This field displays the value that is currently in effect for the SM, with the source of that value in
parentheses. This is the specified maximum amount of data that each SM is allowed to transmit
before being recharged at the Sustained Uplink Data Rate with credits to transmit more.
The configuration source of the value is indicated in parentheses. See
• Maximum Information Rate (MIR) Parameters on Page 83
• Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
• Setting the Configuration Source on Page 324.
Sustained Downlink Data Rate
This field displays the value that is currently in effect for the SM, with the source of that value in
parentheses. This is the specified the rate at which the AP should be replenished with credits
(tokens) for transmission to each of the SMs in its sector. The configuration source of the value is
indicated in parentheses. See
• Maximum Information Rate (MIR) Parameters on Page 83
• Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
• Setting the Configuration Source on Page 324.
Downlink Burst Allocation
This field displays the value that is currently in effect for the SM, with the source of that value in
parentheses. This is the maximum amount of data to allow the AP to transmit to any registered SM
before the AP is replenished with transmission credits at the Sustained Downlink Data Rate.
The configuration source of the value is indicated in parentheses. See
• Maximum Information Rate (MIR) Parameters on Page 83
• Interaction of Burst Allocation and Sustained Data Rate Settings on Page 86
• Setting the Configuration Source on Page 324.
Low Priority Uplink CIR
This field displays the value that is currently in effect for the SM, with the source of that value in
parentheses. The configuration source of the value is indicated in parentheses. See